501-410 JR. HORIZONTAL LADDER
Page
2
Rev 07/29/08
GENERAL USE/FALL ZONE & FOOTING RECOMMENDATIONS
:
Stationary & Portable equipment – Use/Fall zones should extend a minimum of 6 feet in all
directions from the perimeter of the equipment ground space. This area should be covered
with the required amount of resilient safety surfacing material.
For some equipment – Use/Fall zones can overlap. See Consumer Product Safety Commission
Guidelines. Diameter and depth of footings illustrated are satisfactory in most
applications for pipe sizes up to 2 3/8” diameter. Varying soil & climatic conditions
may require deeper and heavier footings in some areas. Check local building codes.
Detail: Permanent Installation
IF RESILIENT SURFACING IS TO BE LESS THAN 12”, THEN ADDITIONAL PIPE SHOULD BE PUT IN
CONCRETE TO MAINTAIN PROPER FINISH GRADE FOR EQUIPMENT.
Footing Layout and Use Area:
