511-102 Stall Bar Fence
Page 2
Rev 0
/21/2008
GENERAL USE/FALL ZONE & FOOTING RECOMMENDATIONS
Use/Fall Zones should extend a minimum of 6 Feet in All Directions from the Perimeter of
the Equipment Ground Space. This are should be covered with the required amount of
Resilient Safety Surfacing Material. For Some Equipment Use/Fall Zone can overlap. See
Consumer Product Safety Commission Guidelines.
Diameter and Depth of Footing Illustrated are Satisfactory in Most Applications for pipe
sizes Up to 2-3/8” Diameter. Varying Soil and Climatic conditions may require Deeper and
Heavier Footings in Some Areas. Check Local Building Codes.
DETAIL: Permanent Installation
Suggested Bracing Method
* If resilient surfacing is to be less than 12”, then additional pipe should be put in
concrete to maintain proper finish grade for equipment.
FOOTING LAYOUT AND USE AREA
