SportsArt Fitness P756, Руководство пользователя

Страница: 15 / 40

(e). Insert and lower the (5 kg/11lb) weight plates (A30) into place on the guide rods
(36) one at a time. Once complete, slide down the upper stack carriage set (A20)
on top of the weight stack.
(
Note: The convex side of weight plate should face up and the stack fork (A7)
points toward the front.)
*
If there is an optional (7.5kg/16.5lb) weight plate installed, insert the optional weight
plates first before the (5 kg/11lb) weight plates (A30).
(f). Tilt the guide rods (36) back into place and re-install the rubber washer to the
guide rods (36), and then align holes and secure the pin (37) back into the place
as shown.
(g). Lift the guide rods up to their mounting position, and then secure them with the
screws (35).
(f)
(e)
(g)
14