SportsArt Fitness ECO-NATURAL Elite T674, Руководство пользователя

Страница: 37 / 55

37
OPERATION User Preference and Component Versions
In the basic setting menu you can change the units of measure, show total dis-
tance and time, and see display and drive board program version numbers.
To access this information, at the startup banner screen, hold ＜ INCLINE
▼
＞
or
＜
SPEED -
＞
key for 3 seconds. At any point in this menu you can
press ＜ STOP ＞ button and return to the startup screen.
Please refer to the following setting procedures:
(1) UNITS
“MPH” or “KPH” will scroll across the screen, press
＜
INCLINE ▲/▼
＞
or
＜
SPEED +/-
＞
key to toggle between the two settings. When your
preference appears, press the ENTER key to confirm and proceed to the
next setting.
(2) PROGRAM VERSION
The following program version will scroll across the screen, press ＜ IN-
CLINE ▲/▼
＞
or
＜
SPEED +/-
＞
key to view each program version. Press
the ENTER key to view total distance.
(a) CTL xxxx
：
Display program version
(b) DRV xx-xxxx
：
Drive board version
(c) SA WELL+ x.x.x
：
SA WELL+ board version
(Available with optional SA WELL+)
(3) TOTAL DISTANCE
“TOTAL DISTANCE xxxxxx KM” or “TOTAL DISTANCE xxxxxx MILE” will
scroll across the screen, press the ENTER key to view total distance.
(4) TOTAL TIME
“TOTAL TIME xxxxxx HOURS” will scroll across the screen, press the EN-
TER key to proceed to the next setting.
(5) PRODUCT SERIAL NUMBER
“S/N xxxxxxxx” will scroll across the screen (as shown in the following figure,
the number 1234567), press the ENTER key to proceed to the next setting.