TOTAL ATTACK™ VOLLEYBALL MACHINE
SPORTS ATTACK, LLC.
•
800-717-4251
•
sportsattack.com
7
STEP SEVEN
Hand tighten locking casters to the rear frame as shown below and unlocking casters to the frame
legs shown below. Casters are pre-applied with red locktite
Total
A
ttack
A
ssembly
Instr
uctions
CAUTION
PERSONAL INJURY HAZARD
Failure to use the special tool
provided to install the casters
could result in personal injury.
EQUIPMENT DAMAGE
Failure to use the special tool
provided to install the casters
could result in equipment damage.
Assembly is now complete, make sure all nuts
and bolts are tightened securely and your Total
Attack Volleyball Machine is ready for use. See
instructions in the manual and on the decals on
the machine for operating procedures
and options.
STEP EIGHT
Tighten casters using wrench shown
BS3
Two locking casters.
STEP NINE
Loosen side-to-side swivel handle on arm
assembly. LOWER the arm assembly to the lowest
position and SECURE in the lowest position hole.
And you can securely attach throwing head by
inserting shaft into bearing provided in arm
assembly and tighten side-to-side swivel
handle (TWO PEOPLE NEED FOR THROWING
HEAD ASSEMBLY )
Unlocking caster.