Sports Attack TOTAL ATTACK Скачать руководство пользователя страница 4

TOTAL  ATTACK™ VOLLEYBALL MACHINE

SPORTS ATTACK,  LLC.  

  800-717-4251  

  sportsattack.com

2

Total 
A

ttack Safety 

Instr
uctions

 

SAFETY INSTRUCTIONS

ELECTRICAL SAFETY

Use a 115 volt single phase 3-wire grounded  
power source.

Up to 200 ft. from power source,  
use a minimum #14/3 grounded 3-wire  
extension cord.

Over 200 ft. from power source, consult  
a licensed electrician for required power  
cord size.

  OPTION B 208/220/230V

Green = Earth

White or Blue = Neutral

Black or Brown = Line

OPERATING SAFETY

1. Never reach hands into throwing wheel area.

2. Always use the Total Attack with throwing wheel shields in place.

  3. Use the Total Attack only under adult supervision.

  4. Use the Total Attack only for their intended purpose.

  5. Do not operate the Total Attack with a damaged cord or plug, if the machine  
  

malfunctions or has been damaged.

  6. Check machine before turning “ON” to make sure there are no foreign object  
  

in feed chute.

  7. If ball becomes lodged and stops motor, immediately turn machine off  
  

before dislodging.

  8. To dislodge ball from throwing wheel, unplug machine and push ball through chute. 
  

Do not reach hand into feed chute with the machine running.

  9. Only one person at a time should operate the Total Attack.

 10. Be sure chain is locked when standing on platform.

 11. Do not allow anyone to walk directly in front of the machine. Keep face and hands  
  

away from ball exit.

 12. A ball should always be test thrown from the Total Attack before beginning  
  

any drill. Throw several balls to verify end location.

 13. Keep hands, hair and loose clothing away from moving parts.

 14. Do not use near water or use damp or wet balls.

WARNING

PERSONAL INJURY HAZARD

Carefully read all instructions  
in this manual, and all labels  
and warnings on the Total Attack 
before using the machine.

Use machine only under adult  
supervision. Failure to operate  
Total Attack as described in this 
manual can result in severe  
personal injury or death.

ELECTRICAL SHOCK HAZARD

Total Attack Volleyball Machine 
must be connected to a properly 
grounded electrical receptacle.

• 

Do not operate on wet ground.

WARNING

PERSONAL INJURY HAZARD

Keep hands away from throwing 
wheels anytime the machine is  
connected to a power source.

Carefully check machine for  
completeness and condition before 
connecting to electrical power.

EQUIPMENT ELECTRICAL 

DAMAGE

DO NOT 

plug in or energize the 

equipment until all Assembly and 
Operation Instructions are read  
and followed.

Содержание TOTAL ATTACK





















Отзывы: