Sports Attack SKILL ATTACK VOLLEYBALL PITCHING MACHINE Скачать руководство пользователя страница 7

SKILL ATTACK

 VOLLEYBALLBALL MACHINE

SPORTS ATTACK, LLC.  

  800-717-4251  

  sportsattack.com

7

CARE & CLEANING

LUBRICATION

 

1. Once per season, or as required.

  2. Throwing wheel motors are sealed and require no lubrication.

EXAMINE THE MACHINE

Examine Skill Attack for condition and completeness before every use:
  1. Throwing wheels must be tight on the motor shafts.

  2. Check that the keyway retaining bolts are tight.

  3. Wheel guard and ball chute must be securely fastened to the throwing head.

CAUTION 

PERSONAL INJURY 

HAZARD

Never attempt to clean the  

throwing wheels while they are 

turning. Rags or implements 

caught in spinning wheels can 

cause serious injury.
Unplug the machine before  

cleaning the wheels or  

performing any service.

CHEMICAL HAZARD

Methyl Ethyl Ketone (M.E.K) 

Read and follow the directions  

and safety instructions on the  

M.E.K container.

FIRE HAZARD

Methyl Ethyl Ketone (M.E.K) 

M.E.K. is flammable. Do not  

use M.E.K. around a fire or  

flame. Do not use M.E.K. near  

a running generator or other 

source of ignition.

Car

e & Cleaning

Содержание SKILL ATTACK VOLLEYBALL PITCHING MACHINE












Отзывы: