SKILL ATTACK
™
VOLLEYBALLBALL MACHINE
SPORTS ATTACK, LLC.
•
800-717-4251
•
sportsattack.com
4
Safety Instructions
SAFETY INSTRUCTIONS
ELECTRICAL SAFETY
Use a 115 volt single phase 3-wire (2 wire with ground) grounded power source.
Up to 200 ft. from power source, use a minimum #14/3 grounded 3-wire 15 amp
minimum rating extension cord.
Over 200 ft. from power source, consult a licensed electrician for required power cord size.
OPERATING SAFETY
CAUTION: Carefully check Skill Attack for completeness and condition before
connecting to electrical power:
1. Never reach hands into throwing wheel area.
2. Always use the Skill Attack with throwing wheel guards in place.
3. Use the Skill Attack only under adult supervision.
4. Use the Skill Attack only for its intended purpose.
5. Do not operate the Skill Attack with a damaged cord or plug if the machine
malfunctions or has been damaged.
6. Check machine before turning “ON” to make sure there are no foreign object in
feed chute.
7. If ball becomes lodged and stops motor, immediately turn the Skill Attack “OFF”
before dislodging.
8. To dislodge ball from throwing wheel, unplug machine and push ball through chute.
Do not reach hand into feed chute with the machine running.
9. Only one person at a time should operate the Skill Attack.
10. Do not allow anyone to walk directly in front of the machine. Keep face and hands
away from ball exit.
11. A ball should always be test thrown from the Skill Attack before beginning any drill.
Throw several balls to verify end location.
12. Keep hands, hair and loose clothing away from moving parts.
13. Do not use near water or use damp or wet balls.
WARNING
PERSONAL INJURY
HAZARD
Carefully read all instructions
in this manual, and all labels
and warnings on the Skill Attack
before using this machine.
Use machine only under adult
supervision. Failure to operate
Skill Attack as described in this
manual can result in severe
personal injury or death.
ELECTRICAL SHOCK
HAZARD
Skill Attack volleyball machine
must be connected to a properly
grounded electrical receptacle.
•
Do not operate on wet ground.
WARNING
PERSONAL INJURY
HAZARD
Keep hands away from throwing
wheels anytime the machine is
connected to a power source.
•
Carefully check Skill Attack
for completeness and condition
before connecting it to
electrical power.
EQUIPMENT
ELECTRICAL
DAMAGE
DO NOT plug in or energize this
equipment until all Assembly
Instructions (see page 5) and
Operation Instructions (see
page 6) are read and followed.