background image

37

DISPLAy  

Keys (Continued)

HILL 

– Each time this key is pressed, the LED above the key will light up and

one of three hill workouts will appear: HILL 1, HILL 2, HILL 3. 

RANDOM 

– Press this key to select one of an almost endless number of 

randomly generated workout programs. Each key press, the console will 

randomly generate a different program.

INTERVAL

 – Press this key to select one of three interval programs: 1:1, 1:2, 2:2. 

Numbers represent minutes. For example, the 1:1 interval program consists of one 

minute of rest, followed by one minute of work.

TRACK 

– In the track workout, one lap equals 0.4 km/0.25 mile.

CARDIO/WT LOSS 

– These heart rate control programs. The weight loss 

target heart rate is calculated as (220-AGE) × 0.65. The cardio conditioning 

target heart rate is calculated as (220-AGE) × 0.8.

GLUTE 

– Each time this key is pressed, one of two glute workouts will ap-

pear: GLUTE 30, GLUTE 45. Numbers represent time. Glute 30 is a 30-min-

ute workout. Glute 45 is a 45-minute workout.

fAT BURN

 – There are 20 levels of difficulties to select from.

ZONE TRAINER

 – This is a heart rate control program. During exercising, 

press this key to lock current heart rate as the target heart rate to train on.

fIT TEST 

– Press this key to select one of 2 types of fitness tests: Bruce  

and Gerkin.

0 – 9 numeric keys

 –  Press these keys to directly input numbers, rather than 

pressing ▲/▼ keys.

CLEAR

 – When inputting setting values, press this key to delete previous setting 

values back to 0. 

INCLINE

 ▲/▼ – Press INCLINE▲/▼ keys to increase or decrease incline 

settings in increments of 0.5%. Or hold these keys to more quickly change 

incline settings.

SPEED 

▲/▼ – Press these keys to increase or decrease speed settings 

in increments of 0.1 kph/mph. Or hold these keys to more quickly change 

speed settings.

STOP/HOLD TO RESET

 – During a workout, press this key to stop the program 

and enter Review Summary mode mode.  At anytime of a program, press and hold 

this key for 2 seconds, it will reset the console and return to idle mode.

TIME

 – Press this key to make time your workout goal.

DISTANCE

 – Press this key to make distance your workout goal.

CALORIES

 – Press this key to make calories your workout goal.

WAKE UP 

– When it is in Energy smart/conservation mode, display is off, press 

this key to end the conservation and return to idle mode.  

Содержание T635M






























































Отзывы: