7
This E-Lock is equipped to alert you
when the batteries are low by illuminating
the red light (center) on the touch pad.
Always test the batteries when installing
or replacing. If the red light comes on
when a number is pressed you know the
batteries are not fully charged.
6. LOW BATTERY WARNING
7. SILENT ENTRY MODE
By activating the E-lock quiet mode, the
safe will no longer make audible sound
when interacting with the vault, allowing
for silent access.
On the keypad, hold the number for
three seconds to activate the mute
function. The sound can be re-activated
by again holding the number one key for
three seconds.
Red = Low Battery
1. To maximize burglary protection and stability, securing the vault to the floor or
wall is recommended.
2.
3.
Always ensure the vault is in an isolated and dry area. Never place the vault in
direct contact with a wet floor. When installing your vault on a concrete floor,
use of a moisture/protective barrier is highly recommended. Failure to do so,
or exposing the vault to chemicals or other adverse environments may void
the warranty.
SA Consumer Products recommends that you store your vault in a closet, office,
basement, bedroom or any other location that is convenient for you but out of
direct line of sight from prying eyes.
8. PROPER PLACEMENT AND MOVING OF VAULT
1
