31
2.
SAFETY INSTRUCTIONS
•
Parents and supervisors should be aware of their responsibility, since, due to children's
natural playfulness and love of experimentation, situations and conduct will likely arise for
which the training unit is not intended.
•
If you allow a child to use the product, do not leave it unattended during use. Make all
necessary adjustments to the product yourself and supervise the child during exercise.
CAUTION - RISK OF INJURY
•
Do not use the product if it is damaged or defective. In this case, contact a professional
workshop or our customer service.
•
Always verify that the product is in impeccable condition before use. Defective components
must be replaced immediately as failure to do so may impair the functioning and safety
of the unit.
•
Make sure that no more than one person uses the product at a time.
•
Always use the product on a horizontal, level, nonslip and solid surface. Never use the product
near water and make sure there is a safety clearance of at least 1 meter on both sides and
2 meters behind and in front of the device. Do not put any objects into any openings on
the product.
CAUTION - PRODUCT DAMAGE
•
Do not alter the product in any way and use only original replacement parts. Have all repairs
carried out in a professional workshop or from similarly qualifi ed persons - improper repairs
can lead to serious risks for the user. Use the product for the intended purposes as described
in the operating instructions only.
•
Shield the product from spraying water, moisture, high temperatures and direct sunlight.
INFORMATION ON ASSEMBLY
•
The product should be carefully assembled by a responsible adult. Ask for the assistance of
another, technically-skilled person in case of doubt.
•
Before beginning assembly of the product, read all assembly steps carefully and review
the diagram.
•
Remove all packaging materials and lay out all the parts. This will give you a good overview
and simplify assembly. Shield the assembly surface from fi lth and scratching by laying down
suitable padding.
•
Check the components against the components list to make sure all are present. Do not
dispose of all packaging materials until assembly is completed.
•
Please note that there is always a risk of injury when using tools to carry out manual tasks.
Therefore, please exercise caution when assembling this product.
•
Make sure your work environment is hazard-free. For example, do not leave any tools lying
around. Place the packaging materials somewhere where they will not pose any hazards
during assembly. Packaging foil or plastic bags pose a suff ocation hazard for children!
•
After assembling the product according to the instructions, make sure that all screws, bolts
and nuts are installed correctly and tightened.
•
If necessary, lay out protective padding (not included) beneath the product to protect your
fl oor as there is no guarantee that, for instance, the rubber feet will not leave marks behind.
SP-RB-9500-iE-IM-INT-V02.indb 31
4/29/2021 7:19:20 PM
Содержание SP-RB-9500-iE
