SportDOG YardTrainer SD-105S, Руководство по эксплуатации и базовому обучению, Страница: 6 / 24

6 1-800-732-0144
Prepare the Collar Receiver
Inserting 3-Volt Batteries
1. Use a small Phillips screwdriver to remove the
two screws on the receiver.
2. Remove the battery door.
3. Insert two, 3-volt lithium batteries per the
diagram on the battery door.
4. Replace the battery door. Check to ensure o-ring
is in place and clean. Press and snap into the
receiver.
5. Tighten the screws, being careful not to
overtighten.
O-Ring
To Turn the Collar Receiver On:
1. Press and hold the On/Off Button until the
Receiver Indicator Light comes on
and the Collar Receiver beeps 5 times.
2. Release the On/Off Button.
The Receiver Indicator Light will fl ash until the
Collar Receiver is turned off. The fl ashing light
indicates the Collar Receiver is ready to receive a
radio signal from the Remote Transmitter.
On/Off Button
To Turn the Collar Receiver Off:
1. Press and hold the On/Off Button until the Receiver Indicator Light
comes on and the Collar Receiver beeps 2 times.
2. Release the On/Off Button.
Note: Maximum battery life will be one month. If the Collar Receiver is left on
continuously, the maximum battery life (before replacing batteries) will be 1-2 weeks.
Receiver Indicator Light
Function Indicator Light Response
Collar Receiver on – good battery Flashes once per second
Collar Receiver on - low battery Flashes once every 4 seconds
Continuous Stimulation button pressed Solid in color
Tone Only button pressed No response
Step
2