SportDOG YardTrainer SD-105S, Руководство по эксплуатации и базовому обучению, Страница: 20 / 24

20 1-800-732-0144
Troubleshooting
The answers to these questions should help you solve any problem you have with this system. If
they do not, please contact the Customer Care Center at 1-800-732-0144 or visit our website at
www.sportdog.com.
My dog is not responding
when I press a button. • Check to see if the Collar Receiver has been turned on.
• If your range has reduced from the fi rst time you have used
it, please check to see if the battery is low in either the
Remote Transmitter or Collar Receiver.
• Many factors can impact the range you have with the
YardTrainer SD-105S. For a list of these factors, please refer
to “How the System Works”.
• You can verify the Collar Receiver is delivering stimulation to
your dog by placing the test light, enclosed in your kit, on the
Collar Receiver. Please refer to the “Test Light Instructions”
for details.
• Increase the Intensity Dial. Refer to “Find the Best Intensity
Level For Your Dog” for more information.
• Make sure the Collar Receiver’s Contact Points are placed
snugly against your dog’s skin. Refer to “Fit the Collar
Receiver” for more information.
The Collar Receiver will not
turn on.
• Make sure the Collar Receiver does not have low batteries -
refer to page 6. If so, replace the batteries with new ones.
The Collar Receiver is not
responding to the Remote
Transmitter. • Verify the Collar Receiver has been turned on. Refer to
“Turning the Collar Receiver On and Off”.
• Refer to “Reset the Collar Receiver.”
Test Light Instructions
1. Hold the Test Light Contacts to the Contact Points.
2. Press a Stimulation Button on the Remote Transmitter.
3. The Test Light will fl ash.
Note: At higher Intensity Levels the Test Light will fl ash brighter.
Save the Test Light for future testing.
Note: If the Test Light does not fl ash, replace batteries and re-test. If Test Light still does not fl ash,
contact the Customer Care Center at 1-800-732-0144.