SportDOG SportTrainer ADD-A-BEEPER SD-BEEP-E, Руководство пользователя

Страница: 5 / 60

WWW.SPORTDOG.COM 5
match the remote Beeper
To match the Remote Beeper to work with a new Remote Transmitter or to program a new
Remote Beeper to work with your existing Remote Transmitter (SD-1875, SD-1875E,
SD-1825, SD-1825CAMO, SD-1825E):
A. Check to make sure the Remote Beeper is off.
B. Press and hold the On/Off Button. The Remote Beeper Indicator Light will come on, then
turn off after 4-5 seconds. If the On/Off Button is released too early, the Remote Beeper
Indicator Light will begin flashing as normal. If this occurs, start over from
a .
C. After the Remote Beeper Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Remote Beeper
Indicator Light flashes 5 times. Once the Remote Beeper Indicator Light has flashed 5
times, the Remote Beeper has been matched and will begin flashing as normal. If the
Remote Beeper Indicator Light does not flash 5 times, start over from
a .
Note: For more information on programming modes, please consult the original Operating Guide
that came with your SD-1875, SD-1875E, SD-1825, SD-1825CAMO, or SD-1825E system. Visit
our website at www.sportdog.com to download any of these Operating Guides.