6 1-800-732-0144
STEP::02
PREPARE THE COLLAR RECEIVER
CHARGE THE COLLAR RECEIVER (SD-425X,
SD-425XS, SD-425XCAMO, SD-825X)
1. Lift the rubber cover protecting the Charging Jack.
2. Connect one of the charge connectors to the Charging Jack (
2A).
3. Plug the charger into a standard 120/240-volt AC wall outlet.
4. Charge the Collar Receiver for 2 hours during the first charge,
and every charge thereafter. Remove the charge connector once
charged and secure the rubber cover fully to ensure debris does not
enter the Charging Jack.
CHARGE THE COLLAR RECEIVER (SD-1225X)
1. Align the Contact Points with the Charging Cradle, making sure the hole
on the Charging Cradle aligns with the Receiver Indicator Light.
2. Push the Charging Cradle up and back on the Collar Receiver, until the
cradle snaps into place (
2B).
3. Plug the charge connector into the Charging Cradle (
2C).
4. Plug the charger into a standard 120/240-volt AC wall outlet.
5. Charge the Collar Receiver for 2 hours during the first charge, and every
charge thereafter. Remove both the charge connector and Charging
Cradle from the Collar Receiver once charged. The Charging Cradle is not
intended to be attached when the Collar Receiver is in use.
Using Li-Ion technology, the Collar Receiver only requires a 2 hour
charge. It is not harmful to let the unit charge for more than 2 hours.
TO TURN THE COLLAR RECEIVER ON
Press and release the On/Off Button. The Collar Receiver Indicator Light
will come on and the Collar Receiver will beep 1-2 times (1-3 times for
SD-1225X) depending on what stimulation range is chosen (page 9).
The default is 2 (medium).
TO TURN THE COLLAR RECEIVER OFF
Press and release the On/Off Button when the Receiver Indicator Light
comes on solid red and the Collar Receiver beeps for 2 seconds.
To extend the life between charging cycles, turn the Collar Receiver off
when it is not in use.
NOTE: Approximate battery life between charges is 50 to 70 hours (140 to 160 hours for
SD-1225X), depending on
frequency of use.
2A
2B
2C
ON/OFF
BUTTON
