10 1-800-732-0144
STEP::05
PROGRAM THE REMOTE TRANSMITTER
Your Remote Transmitter has seven operational modes to allow you to select the best match for your type or style
of training. There is also one programming mode (Mode V/T) which allows you to change the system’s ID code. The
Remote Transmitter is factory set to mode 5.
TO CHANGE THE MODE
1. Referring to the following table, adjust the Intensity Dial to your desired
mode.
2. Turn the Remote Transmitter over and remove the belt clip if attached
(
SD-825X and SD-1225X only).
3. Using a pen or the tine on the buckle of your collar strap, press and
release the Mode Button. When the Mode Button is pressed, the
Transmitter Indicator Light will be solid in color. When it is released, it will flash the mode selected.
For example, if mode 6 is desired, adjust the Intensity Dial to Level 6. Once the Mode Button has been depressed,
the Transmitter Indicator Light will be solid, and once the Mode Button is released, the Transmitter Indicator Light
will flash 6 times.
MODE UPPER BUTTON FUNCTION
LOWER BUTTON FUNCTION
SIDE BUTTON FUNCTION
NUMBER
OF DOGS
1
Continuous stimulation (Level
set by Intensity Dial) OR Vibe if
V/T on dial
Momentary stimulation (Level
set by Intensity Dial) OR Vibe if
V/T on dial
Tone only
1
2
Continuous stimulation (Level
set by Intensity Dial) OR Tone if
V/T on dial
Momentary stimulation (Level
set by Intensity Dial) OR Tone if
V/T on dial
Vibe only
1
3
Dog 1: Continuous stimulation
(Level set by Intensity Dial) OR
Tone if V/T on dial
Dog 2: Continuous stimulation
(Level set by Intensity Dial) OR
Tone if V/T on dial
Dog 3: Continuous stimulation
(Level set by Intensity Dial) OR
Tone if V/T on dial
3
4
Dog 1: Continuous stimulation
(Level set by Intensity Dial) OR
Vibe if V/T on dial
Dog 2: Continuous stimulation
(Level set by Intensity Dial) OR
Vibe if V/T on dial
Dog 3: Continuous stimulation
(Level set by Intensity Dial) OR
Vibe if V/T on dial
3
5*
Medium Continuous stimulation
(Level set by Intensity Dial) OR
Tone if V/T on dial
Low Continuous stimulation
(Level set by Intensity Dial) OR
Tone if V/T on dial
High Continuous stimulation
(Level set by Intensity Dial) OR
Tone if V/T on dial
1
6
Medium Continuous stimulation
(Level set by Intensity Dial) OR
Vibe if V/T on dial
Low Continuous stimulation
(Level set by Intensity Dial) OR
Vibe if V/T on dial
High Continuous stimulation
(Level set by Intensity Dial) OR
Vibe if V/T on dial
1
7
Continuous stimulation (Level
set by Intensity Dial) OR Tone if
V/T on dial
Momentary stimulation (Level
set by Intensity Dial) OR Tone if
V/T on dial
Locate Remote Beeper**
1
V/T
(ID CODE)
N/A
N/A
See STEP 8
N/A
NOTE: Modes 1, 2, 3, 4, and 7 provide 7 levels of stimulation, which correspond to the setting of the Intensity Dial.
Modes 5 and 6 provide more “increments” to choose from – a total of 21 levels of static stimulation. For
example, in mode 5 with the Intensity Dial set at 1, the Lower Button provides level 1 of 21, the Upper Button
provides level 2 of 21, and the Side Button provides level 3 of 21.
* Factory Default Mode.
** Locate Remote Beeper: The Side Button turns run mode off and locates the Remote Beeper. To enable run mode again, press and hold the
Side Button for 3 seconds.
