18
1-800-732-0144
WWW.SPORTDOG.COM
19
S
TE
P
::
0
7
PROGRAM THE SYSTEM FOR TWO-DOG OPERATION
SportDOG
™
Collar Receivers can be set to respond to either the
up
or
down
toggle switch position.
A SportDOG Add-A-Dog
®
Collar Receiver must be purchased to train a second dog in two-dog mode.
Please refer to the back cover for compatible Add-A-Dog Collar Receivers for this system.
1. Program the Remote Transmitter to any of the modes found on
pages 14-17.
2. Then flip the toggle switch to the
up
position to program the first
Collar Receiver.
A.
Turn the Collar Receiver off.
B.
Press and hold the On/Off Button. The Receiver Indicator Light
will come on, then turn off in 4-5 seconds. If the On/Off Button
is released too early, the Receiver Indicator Light will begin its
normal flashing. If this occurs, start over and repeat from
A
.
C.
After the Receiver Indicator Light has turned off, release the On/
Off Button.
TOGGLE
SWITCH
D.
Press and hold the Top Button on the Remote Transmitter until the Receiver Indicator Light
flashes 5 times. You may need to hold both units 2-3 feet from each other.
3. Program the second Collar Receiver the same way using
A
through
D
above, but with the toggle
switch in the
down
position.
PROGRAM THE SYSTEM FOR THREE - SIX-DOG OPERATION
SportDOG
™
Add-A-Dog
®
receivers must be purchased to train additional dogs.
Please refer to the back cover for compatible Add-A-Dog Collar Receivers for this system.
THREE DOG OPERATION
1. Making sure the toggle switch on your Remote Transmitter is in the
up
position, program the Remote
Transmitter to mode 3, 4, 5, 6 or 8 (see pages 14-15).
2. Program the first Collar Receiver:
A.
Turn the Collar Receiver off.
B.
Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in
4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin
its normal flashing. If this occurs, start over and repeat from
A
.
C.
After the Receiver Indicator Light has turned off, release the On/Off Button.
D.
Press and hold the
Top Button
on the Remote Transmitter until the Receiver Indicator Light
flashes 5 times. You may need to hold both units 2-3 feet from each other. If the Receiver
Indicator Light does not flash 5 times, start over and repeat from
A
.
3. Program the second Collar Receiver using
A
through
D
above, but using the
Middle Button
in
place of the Top Button.
4. Program the third Collar Receiver using
A
through
D
above, but using the
Bottom Button
in place of
the Middle Button.
SIX DOG OPERATION
Making sure the toggle switch on your Remote Transmitter is in the
up
position, program the Remote
Transmitter to mode 5 or 6 (see pages 14-15).
For six dog operation repeat above steps 2-4 with the toggle switch in the
up
position for dogs 1, 2,
and 3; then flip the toggle switch to the
down
position, and repeat above steps 2-4 for dogs 4, 5 and 6.
S
TE
P
::
08
Содержание PROHUNTER 2525
Страница 1: ...OPERATING GUIDE PLEASE READ THIS ENTIRE GUIDE BEFORE BEGINNING ...
Страница 26: ...26 1 800 732 0144 ...
Страница 27: ...WWW SPORTDOG COM 27 ...