10
1-800-732-0144
Program the Remote Transmitter
Note: The Transmitter is factory set to Mode 1. The Mode of the Remote Transmitter can be
changed to fi t your type or style of training.
To change the mode:
1. Referring to the table below, adjust the Intensity
Dial to the Mode you want to use.
2. Following the same instructions for replacing/
inserting the battery, remove the panel from the
opposite side of the knob and toggle switch.
3. Depress and release the Mode button. When
the Mode button is pressed, the Transmitter
Indicator Light will be solid in color. When it is
released, it will fl ash the Mode selected.
For example, if Mode 2 is desired, adjust the
Intensity Dial to Level 2. Once the Mode button
has been depressed, the Transmitter Indicator
Light will be solid, and once the Mode button is
released, the Transmitter Indicator Light will fl ash
2 times.
Note: Continuous Stimulation will transmit for no more
than eight continuous seconds no matter how long the
button is pressed. To reactivate, release and repress the
button.
Mode Button
MODE
UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
TOGGLE
SWITCH
(LEFT/RIGHT)
# OF
DOGS
1
Continuous Stimulation
with intensity level set
by Intensity Dial – Dog
1 or 3
Continuous Stimulation with
intensity level set by Intensity
Dial – Dog 2 or 4
Dog 1-2/
Dog 3-4
1-4
2
Continuous Stimulation
with intensity level set by
Intensity Dial
Momentary (Nick)
Stimulation with intensity
level set by Intensity Dial
Dog 1/
Dog 2
1-2
Step
5
