www.sportdogbrand.com
5
Attaching the Beeper 400 to a Collar
The Beeper 400 attaches to the
included collar strap. It will also fi t
most other sporting-style collar straps
(
1
/
10
inch thick and 1 inch wide). To
attach, remove one or both of the
beeper’s end lids and thread the collar
though the brackets. Position the
beeper behind the dog’s head. If you
are using a Collar Receiver, it should
be positioned directly under the dog’s
neck as shown in the photo.
_____________________________________
Turning the Beeper 400 On/Off
• Choose between the features and adjust the switches
accordingly.
• Make sure the Volume Switch is set to the LOW position for
fi rst time use. Then tighten the lid snugly to ensure the lid is
watertight.
• Insert the 3-volt lithium
battery (CR123A) with the
“+” end pointing outward
and tighten the lid.
• The position of the lid
serves as the ON/OFF
switch. When the lid becomes
diffi cult to turn, align the dot with the
ON or OFF position.
