10
b. If your scoreboard is a wireless system, verify that the radio transmitter interface cable
is connected to both the transmitter and also one of the DIN sockets on the back of the
controller.
2. The HOME and GUEST scores should display a “0” and the PERIOD should show a “1”.
3. Use the controller keys to verify that all sections of the scoreboard respond properly.
a. Example: Add scores to both teams, increase the PERIOD, use the PENALTY and
GOAL keys.
4. If the scoreboard displays a flashing “8” in the PERIOD position, this is either an indication of
no signal communication between the scoreboard and controller, or simply an extended period
of inactivity with the controller. The timeout period is one hour. If the time is less than that,
check all communication cable connections and press RESET on the controller. If the flashing
“8’ remains, contact Technical Support.
NOTE: Always turn both the controller and the scoreboard OFF after each use. If the
controller is turned OFF but the scoreboard remains ON, (or if the controller loses
communication with the scoreboard), the scoreboard’s INNING digit will begin to flash with
the rest of the displays blank. This feature is intended to remind the user to turn power to
the scoreboard OFF after each use.
NOTE: To activate your warranty, your check off sheet must be signed and returned/faxed to
Sportable Scoreboards Inc. A copy of this sheet should be placed with your Installation/Operators
Manual in the event technical support is needed. Fax number (270) 753-3773.
