Instruction manual
for product code 323 5805
Version 02/2020 |
Page 8
Assembly
Preparing the installation site
The manufacturer recommends preparing a foundation pit with a dimension of 3,000×4,000×400 mm. Fill the bottom of the
pit with compacted, crushed stone to a level of 100 mm. It is essential to pour the concrete using reinforced steel mesh.
When preparing the installation site and planning its location,
please take into account
that the slide should be facing a
north-easterly direction or be partially in the shade of trees, as its surface may get too hot otherwise.
Foundation
The Sport-Thieme water slide is to be installed on a concrete foundation with the water basin being at least 300 mm deep
and 1,500 mm wide
to either side of the slide’s exit point
. Once the slide has been assembled, it should be mounted to the
foundation. The manufacturer recommends using high-performance (hot-dip galvanised) HSA-F wedge anchors (M12×137)
for everyday static loads in uncracked concrete.
