Spooky Pinball Alice Cooper's Nightmare Castle, Руководство по обслуживанию

Страница: 4 / 27

2) Game Assembly and Setup
Thank you for purchasing a game from the smallest, happiest, goofiest little pinball company on the planet! Your support means everything to our family and business.
Here are a few quick notes to help you get your new game set up.
Ideal playfield pitch is 6.5 degrees
2.1 Unboxing and parts inspection
Tools required for initial machine assembly
Utility knife or razor blade
Ratchet with ⅝” socket or ⅝” wrench
Small bubble level (side to side and incline)
Wire cutters
Parts List
1 Set of coin door keys
1 Tilt plump bob
1 Backbox (head) bolt
4 Pinball legs
4 Pinball leg levelers with nut
8 ⅝” Headed pinball leg bolts
4 Pinballs
1 Power cable (line cord) for your country’s electrical system
#1 - Your coin door keys are located inside this leg box. All the pinballs, a power cord, legs, leg bolts, and head bolt & washer, are in the same package. Your backbox key is inside the coin door. Please take a minute to inspect to make sure you
have all the parts and that they are not damaged.
#2 - If your game came in a box then there are a couple of ways to begin. If your game did not come in a box, then continue on to step
#3. Begin by opening the flaps on the top of the box. Be mindful to make sure you remove the staples from the flaps so you don’t get scratched or misplaced any of them.
​
DO NOT CUT THE PLASTIC STRAP JUST YET!
A) With some assistance, lay the machine flat on the floor on the side that is marked “Truck this side only.” Grab the plastic strap and pull the game from the box. Once the game has been removed from the box (and with the assistance of a
helper), stand the game back upright on its back.
OR
B) Using your utility knife, carefully cut down the sides of the box that are labeled “Truck this side only,” making sure that your knife DOES NOT come in contact with the game cabinet itself. Once both sides are cut you will be able to
access the pinball cabinet itself.
#4 - Start by threading the leg leveler nut onto each of the levelers. Once that is complete then you can thread the leg leveler into the bottom of each of the pinball legs. Let’s begin with all of the levelers adjusted to their lowest positions (threaded
all the way in).
3