Spod HD, Познакомьтесь с устройством

Страница: 4 / 6

START UP
Simply plug in the panel to activate it. From this point, all switch-
es will work and you can turn any circuit on and off. The panel is
now ready to link to a Bluetooth device for programing.
STATUS LIGHTS
BACK LIGHTS OFF FUNCTION
MULTIPLE SOURCE SELECT
LOCK-OUT FEATURE
Indicates switch is on.
Solid on indicates switch is programed for flash / strobe.
Blinking indicates switch flash / strobe feature is activated.
Visual feedback to show switch has been activated.
When all three lights flash in a pattern, this indicates a
fault / short on that particular switch.
Simultaneously press buttons 6 & 7 to turn off the
lighting on the panel. Accessories will remain on.
Push any button to wake up lights.
Simultaneously press buttons 5 & 8 to toggle between
source 1, 2, 3 & 4. The 3 status lights will light up to
indicate which source is selected.
Simultaneously press buttons 7 & 8 to lock all buttons
on the panel. Accessories will remain on. Hold 7 & 8
again to unlock.
x x
x x
x x
SLEEP MODE
The HD will go into “Deep Sleep” after 6 hours of inactivity (ie: no
usage of the HD or not running the engine). Once in deep sleep,
the HD will turn off any accessories that were left on (including
refrigerators!).
If you are running the HD with a Bantam, this feature can be disabled by
turning on DIP switch #1. If you are running the HD with a SourceSE, please
contact us if you would like this feature disabled: sales@4x4s-pod.com.
You will need to have access to this plug, or at the BantamX
board end, in order to program the panel pairing.
Source
#1
Source
#2
Source
#3
Source
#4