14. The correct firmware, ‘on-line diagram html’ and ‘on-line diagram.gif’ should have already been installed on the
Bootloader by your supplier. However, if you need to reload them please obtain the appropriate versions of these
files from Splash Monitoring and consult your Bootloader manual for instructions on how to load them.
15. Plug the Bootloader into the LAN with an Ethernet cable.
16. In Memory Manager, enter the IP address and click Test IP, making certain that the IP matches what was set in
the Bootloader.
17. If this does not show a “success” result, it may be that your PC is not configured to communicate on the chosen
IP network. See separate Trouble-Shooting Guide.
18. Browse the IP address you set with "/GRAFIK.htm" added to the end (eg. 192.168.66.210/GRAFIK.htm), which
should show you the raw Bootloader values, or in the case of some Internet Explorer versions, you may need to
right click and "View Source" to see the result.
19. If after repeated attempts this process is unsuccessful, consult the separate Trouble-Shooting Guide available at
www.splashmonitoring.com/help
.
