Turn on the power supply to the dryer, and then test that the dryer will operate when
the user’s hands are placed within the detection range.
The motor speed and sensor range can be adjusted to suit user preference and the
environment, if required. The heater element can also be switched of
f if desired.
Warm air speed adjustment
1.Switch of
f the power, loosen the cover
screws and remove the cover.
2.Use small Phillips head screwdriver
to turn variable resistor shaft. Turn
clockwise to increase the motor
speed; turn counter-clockwise
to reduce the motor speed.
Sensor range adjustment
1.Switch of
f the power, loosen the cover
screws and remove the cover.
2.Use small Phillips head screwdriver
to adjust the variable resistor. Turn
clockwise to increase the sensitivity;
turn counter--clockwise to reduce
the range.
commissioning
TSL.C.060 CHANNEL HAND DRYER 15
