Velocity Series Drum Set Owner’s Manual
6
Mounting the Tom to the Bass Drum
1.
Insert long section of the tom L-arm holder a few
inches into the bass mount.
2.
Tighten the wing nut on the bass mount.
3.
Loosen the wing nut on the tom arm and position
the tom arm as shown and retighten the wing nut.
4.
Place the mounted tom onto the tom arm and
tighten the wing nut on the tom mount.
5.
Adjust height and angle of toms for comfortable
playing style.
6.
Secure memory locks for additional stability and
memory by tightening the collar of the memory lock
to the mounts of the bass and tom. The next time
you need to set up the drums, the memory locks will
ensure the same angle and height.
“L” Arm
Tom Mount
Memory Locks
Wing Nut
Bass Mount
Wing Nut
Attaching the Suspension Mount
1.
The 10” tom utilizes a suspension mount that allows the shell to fully resonate.
2.
Remove 4 tension rods from the top of the drum, accounting for position of the drum badge to
face the audience.
3.
Then position suspension mount under the drum hoop and replace the 4 tension rods.
4.
The Tom is now ready to use.
Содержание StreetBop S5418SMG
Страница 8: ......
