SPL StreetBop S5418SMG, Инструкция по сборке

Страница: 5 / 8

S o u n d P e r c u s s i o n L a b s . c o m
5
Floor Tom Head Assembly
Drum Key
Washer
Hoop
Short Tension Rod
Shell
Lug
1.
Place coated white batter drum head on top of the drum shell.
2.
Place the metal hoop over the drum head, aligning the holes in the
hoop with the drum lugs.
3.
Insert short tension rods with metal washers through the holes
in the hoop.
4.
Thread the tension rods into the lugs and finger tighten.
5.
Using the drum key, gradually tighten each tension rod in equal
amounts using the same criss-cross pattern as done on the
bass drum until the head is taut and wrinkle free.
6.
Repeat above steps for the bottom of the drum with the smooth
white resonant side drum head.
Floor Tom Leg Assembly
Floor Tom Leg
Bracket
Wing Nut
1.
Insert floor tom leg into the bracket.
2.
Tighten the wing nut on the bracket.
3.
Repeat for remaining legs.
4.
Adjust height of legs for comfortable playing style.