Phonitor x – Quickstart
Phonitor x – Quickstart
2
3
Phonitor x
Serial
Number
Made in Germany
~ 115V AC / ~230V AC, 50 Hz / 60 Hz, P max. 45 W
R
B
A
PGM
VO
LU
M
E
Refer to
Manual
Connect to SPL
Power Amp(s) for
remote power on/off
AVIS: RISQUE DE CHOC ÉLECTRIQUE • NE PAS OUVRIR
RISK OF ELECTRIC SHOCK
D O N O T O P E N
C AU T I O N
Fuses:
Voltage Selection:
230V AC: T 500 mA L 250 V
115V AC: T 1 A L 250 V
1. Remove Fuse Holder
2. Exchange Fuses
3. Flip Over 4. Reinstall
XLRs: balanced, Pin 2 = Hot (+)
For unbalanced operation
bridge Pin 3 to GND.
RCAs: Unbalanced, Tip = Hot (+)
W I R I N G
ON BOTTOM SIDE:
DIP SWITCHES
1 ON: HP Out +22dB
2 ON: HP Out +12dB
3 ON: VU 0 = +10dB
4 ON: XLR Direct Out
5 ON: RCA Direct Out
6 ON: AMP CTL power off
when listening to
SPE
AK
ER
OUTP
UTS
R
L
R
L
AN
ALOG
SOUR
CES
DIG
ITA
L S
OURC
ES
AMP CTL
SPEAKER OUTPUTS
L
R
ANALOG SOURCES
DIGITAL SOURCES
L
R
USB
OPTICAL
AM
P CTL
R
L
R
L
L
L
R
COAX
IR
LATERALITY
Mono
Stereo
Phonitor x
VOLUME
M
IN
2
3
4
5
M
AX
Off
On
MATRIX
Mute
SOURCE
MODE
OUTPUT
Digital
RCA
XLR
DIGITAL
Coaxial
Optical
USB
CROSSFEED
22
°
30° 40°
55°
ANGLE
Le
ft
Cen
ter
Ri
gh
t
VOLTAiR
120V DC Audio Rail
Preamplifier & Headphone Amplifier
Standard
Balanced
ON
Start up
Read the security advices on page 9!
Make sure that the selected mains voltage of the Phonitor x is according to the
mains voltage of your region.
Make sure that the mains switch on the rear of the Phonitor x is set to Off
(Off = O / On = I).
The standby switch on the front panel has to be set to .
Connect the supplied power cord to the Phonitor x and an appropriate mains
socket outlet.
If the supplied power cord does not match your mains socket outlet, please contact your dealer.
Turn off all devices you wish to connect to the Phonitor x.
Connect the outputs of your analog sources (e.g. CD Player, Phonos) to the
analog inputs of the Phonitor x. Please use appropriate audio cables (XLR, RCA).
Audio cables not included in the scope of delivery.
If the DA converter option is fi tted connect the outputs of your digital sources
(e.g. Mac, PC or CD Player) to the digital inputs of the Phonitor x. Please use
appropiate audio cables (USB, coaxial, optical).
Digital audio cables not included in the scope of delivery.
For Windows
®
computers download the latest driver from phonitorx.spl.info under the “Driver” tab and have it
installed. Macs, iPhones and iPads do not require a driver since the USB port is Apple-Class compliant.
Connect audio cables (XLR, RCA) between the Phonitor x and a following
amplifi er or active speakers.
Audio cables not included in the scope of delivery.
Connect your headphone to the balanced or standard headphone output of the
Phonitor x.
To protect the headphone power amplifi er stage and guarantee a long and consistent performance please note:
• Turn down VOLUME before swapping headphones.
• Never insert a mono jack plug into the front panel stereo jack.
• Make sure that the headphones stereo jack is fully inserted.
• If you use an adapter from 3,5 mm to 1/4
"
(6,35 mm) on your headphone make sure that the adapter is fully
screwed on respectively fully plugged in.
If you own an SPL Performer power amplifi er you can connect the AMP CTL
output of the Phonitor x with a mono mini jack cable to the AMP CTL of the
Performer to switch both units between standby and operation together.
Mono mini jack cable not included in the scope of delivery.
1
2
3
4
5
6
7
8
9
10
11
Analog Audio Inputs
Digital Audio Inputs
Balanced Headphone Connection
Audio Output
Standby Switch
Standard Headphone Connection
AMP CTL
optional
Mains Voltage
Mains Switch
Mains Connector
7
8
10
9
4
10
11
2
3
EN
DE
5
