Top View of Drum Placement
Bass Drum
Pedal
Mounted
Tom
Cymbal
Snare
Hi-Hat
Cymbal Arm Assembly
Drum Throne Assembly
1.
Slide cymbal arm
(J)
into mount of bass drum and set
desired height using wingnut.
2.
Place cymbal
(K)
between felt pads. Tighten wingnut
above cymbal only enough to hold cymbal and felts, but
loose enough to let cymbal move freely when struck.
3.
Set desired cymbal angle using tilter adjustment.
1.
Fold out legs at base of Drum Throne
(Q)
.
2.
Place center tube into base and tighten height adjustment
wingnut. It is recommended to place wingnut as shown for
comfortable playing style.
3.
Place seat top and tighten wingnut.
Do not use drum seat for other uses than its intended purpose
as a seat. Do not stand on throne.
Cymbal goes here
Warranty
One (1) Year Limited Warranty
Subject to the limitations set forth below, Sound Percussion Labs
™
hereby represents and warrants that the components of this product shall be free from defects in workmanship and materials,
including implied warranties of merchantability or fitness for a particular purpose, subject to normal use and service, for one (1) years to the original owner from the date of purchase.
Limits of Liability
Retailer and manufacturer shall not be liable for damages based upon inconvenience, loss of use of product, loss of time, interrupted operation or commercial loss or any other incidental or
consequential damages including but not limited to lost profits, downtime, goodwill, damage to or replacement of equipment and property, and any costs of recovering, reprogramming, or reproducing
any program or data stored in equipment that is used with Sound Percussion Labs
™
products. This guarantee gives you specific legal rights. You may have other legal rights which vary from state
to state. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Sound Percussion Labs
P.O. Box 5111
Thousand Oaks, CA 91359-5111
All trademarks and registered trademarks mentioned herein are recognized as the property of their respective holders.
1406-10182
10182 SPL D1316 Li'l Kicker Assembly Manual.indd 4
6/5/14 4:52 PM
