P n e u m a t i c
D r i l l
2 1 3 6 2 0 0 1 0
Translation of the original manual,
compiled: 01.09.21
213620010_BA_en_Version_01.doc
Page 17 of 30
Accessories
Mount the quick-release chuck
SPITZNAS part no.:
9 2902 0040
Shut the pneumatic supply and disconnect the pneumatic hose from the pneumatic drill. Wear protective
gloves when replacing the drill chuck to avoid injuries.
Open the drill chuck item 8 by turning. (see fig. 26).
Fig. 26
Put the hexagon screw driver SW 5 through the drill chuck item 8 on the socket head
screw (see fig. 27 and 28).
Fig. 27 Fig. 28
Turn the hexagon screw driver SW 5 until the drill chuck item 8 becomes loose and pull it from the shaft
(see fig. 29 and 30) .
Fig. 29 Fig. 30
Turn to open
8
Undo by turning
8
8
B.V.Technisch Bureau Duspra Amersfoortseweg 24-14 3951 LB Maarn The Netherlands
Tel: +31(0)180-410100 E: [email protected] W: www.duspra.nl
