Spitwater Vacstorm M9, Руководство по эксплуатации и техническому обслуживанию

Страница: 5 / 5

TROUBLESHOOTING
FAULT CAUSE REMEDY
The motor does not
start when switch is
activated Plug is not connected Check the plug
Power cord is damaged Contact authorised service person / agent
No power supply Contact an authorised electrician to check
power supply
Switch faulty Contact authorised service person / agent
The motor is noisy Contact authorised service person / agent
Reduced suction Suction hose / ext tube /
nozzle blocked Check and clean / replace as necessary
Recovery tank is full Empty recovery tank
Head not fitted correctly
or drain hose open Check and adjust as necessary
Reduced water spray Filter clogged/damaged Check and clean/replace as necessary
Spray nozzle clogged Check and clean/replace as necessary
Solution tank empty Refill tank
Pump faulty Contact authorised service person / agent
NOTE: If the fault cannot be identified or corrected using the above list (or remedy states contact
Authorised service person / agent) stop using the machine immediately and contact an authorised
service person / agent to rectify the fault.