(QJOLVK
8VHUPDQXDO
3.
Remove the fastener (A).
4.
Remove the cover (B) from the unit.
5.
Remove the brackets and fasteners. Keep them for
future use.
6.
Move the unit to its location of installation. Lift the
unit with a hoist.
5.3
Mounting and installation
5.3.1
Mounting
1.
Floor mounting:
Place the unit on a flat surface,
against a flat, closed wall. Mount the unit to the
floor. Use brackets and adequate fasteners.
2.
Wall mounting:
Mount the unit to a flat, closed
wall using the holes and spacers.
5.3.2
Installation
Mechanical
1.
Make two branch lines ¾” (A) on the side of the
main transport line.
B
A
CAUTION
Make sure that the mounting can support
the filled unit: empty 5 kg!
NOTE
The distance between them should be at
least 500 mm. The inlet of the unit should
be connected to the first connection point in
the flow direction.
1
1
2
A
500mm
A
B
B
>
