Spirit XIC600, Руководство пользователя

Страница: 25 / 29

25
GENERAL MAINTENANCE
1. Do not service internal parts of pedals. If they are found to be worn internally, we recommend replacing the pedal.
2. Use of lubricants or cleaning solutions other than those specified will result in diminished performance and a shorter
life span for that part.
3. Wipe down all areas in the sweat path with a damp cloth after each workout.
4. If a squeak, thump, clicking or rough feeling develops the main cause is most likely one of three reasons:
I. The hardware was not sufficiently tightened during assembly. All bolts that were installed during assembly need to
be tightened as much as possible. It may be necessary to use a larger wrench than the one provided if you cannot
tighten the bolts sufficiently. We cannot stress this point enough; 90% of calls to the service department for noise
issues can be traced to loose hardware.
II. The crank arm nut needs to be retightened.
III. If squeaks or other noises persist, check that the unit is properly leveled. There are 2 leveling pads on the bottom
of the rear stabilizer, use a 14mm wrench (or adjustable wrench) to adjust the levelers.
Part Recommended Action Frequency Cleaner Lubricant
Pedals
Ensure that pedals are tight in crank arms; that all
screws on pedals are tight; and that the pedal straps
are not frayed
Before each
Use
N/A N/A
Frame Wipe down by using a soft damp clean cloth Daily Water N/A
Flywheel
Wipe down by spraying on a rag and applying a light
coat to sides of the flywheel
Weekly
WD-40
Spray
N/A
Brake Pad Inspect for excessive wear or a dry leather brake pad Weekly N/A
3-IN-ONE Oil or
10W Oil.
Do not use
Silicone-based
Lubricants