Spirit SPT0063, Руководство пользователя

Страница: 7 / 33

6
UPRIGHT TUBE ASSEMBLY
1.
Take the Left and Right upright tubes (part numbers 5 & 4 ) and slide the upright covers ( 99 & 100
right) onto the tubes (observe the cover orientation is correct). Connect the Middle Console Cable
(
38
) that exits from the bottom of the right upright tube with the lower Console Cable (
39
). Insert the
Left and Right ( 5 & 4 ) Uprights into the Left and Right Receiving Tubes (holes are on the outside of
the tubes). Be careful not to pinch the wire when installing the upright.
NOTE: Partially tighten all bolts in this Step. This will allow for easier console assembly.
2.
Attach the tubes with three Button Head Socket Bolts ( 93 ) from each side and two Button Head
Socket Bolts (
93
) and two Curved Washers (
94
) from the front. Partially tighten using the Combi-
nation M5 Allen Wrench & Phillips Head Screw Driver ( 96 ).
HARDWARE
# 93 . 5/16” x 15mm
Button Head Socket Bolt
(8 pcs)
# 94 . 5/16” x 19 x 1.5T
Curved Washer (2 pcs)
1