background image

LIMITED WARRANTY

Hayter Limited 

warrants to the original user/purchaser that this unit shall be free from defects

in material and workmanship under normal use and service for a period of 

three years

 from the

date of purchase. The manufacturer of major proprietry components ie. engines, gearbox / 

transaxle (where applicable) furnish their own warranty and services are provided through their 

authorised network. To qualify for the full benefit of the warranty, the warranty registration card 

must 

be returned within 

14 days 

of purchase. Subject to the conditions and exclusions noted in 

this limited warranty, we shall at our option, repair or replace any warranted part during the 

applicable period. If you are in doubt or experience any difficulty, please consult a Hayter 

Authorised Service Dealer for clarification.

To qualify for the extended warranty (second and third year) of the 

three year limited warranty

the machine 

must

 have annual services carried out by an Authorised Hayter Service Dealer. 

These chargeable services should be carried out within 12 and 24 months of the date of purchase.

Excluded from the extended warranty period are those items which are subject to normal wear 

and tear e.g. tyres, wheels, cutterblades, belts, cables, grassbags, brush/bristles, batteries and 

other consumable wearing parts.

All

 consumer machines which are fitted with a 

genuine

 Hayter friction disc as original 

equipment before use, are covered by a 

Lifetime Warranty

 against the engine crankshaft 

bending. 

Note: 

friction washers, blade brake clutch (B.B.C) units and other such devices are not 

applicable. Only machines fitted with a 

genuine

 Hayter friction disc, which are used in 

accordance with the recommended operating and maintenance procedures, are covered.

This warranty does not apply to any unit that has been tampered with, altered, misused, abused or 

used for hire, and will become invalid if non genuine Hayter parts are fitted. This warranty does 

not cover minor mechanical adjustments unless they are due to defective material or 

workmanship. Consult the Owner’s Handbook or a Hayter Authorised Service Dealer for 

assistance when making these adjustments.

A warranty period of 90 days applies to machines used for commercial purposes.

To make a warranty claim, return the unit to a Hayter authorised dealer along with proof of 

purchase stating the machine serial number and date of purchase. The service receipt(s) or this 

Owners Handbook with the 1st/2nd year service boxes fully completed, must be produced as 

proof of entitlement to the extended warranty period. Subject to the conditions and exclusions in 

this limited warranty, the authorised dealer will, at our option, repair or replace any warranted 

part within the duration of the warranty period.

This limited warranty gives you specific legal rights and is in addition to any statutory rights to 

which you may be entitled and your statutory rights are not affected by this warranty. If you need 

additional information concerning this written warranty, or assistance in obtaining services, 

please write to : 

HAYTER LIMITED, Service Department, Spellbrook, Bishop’s Stortford, 

Hertfordshire CM23 4BU

UK ONLY:

 Details of your local 

Hayter

 authorised dealer are contained in Yellow Pages and 

the Hayter website www.hayter.co.uk or contact:- Freephone 0800 616298.

Issue: 12.08.03

1.7

WARRANTY

111-1102 (B)  11/11/08  9:56 am  Page 1.7

Содержание Spirit 41 617E









































Отзывы: