background image

1.20

To prevent accidents stop the engine and disconnect the spark plug
lead before attempting to carry out maintenance procedures on the
mower.

After the very first hour check clutch adjustment. See page 1.24.

After the very first five hours change the engine oil.

Follow the hourly or calendar intervals, whichever occurs first. More
frequent service will be required if working for prolonged periods
under dusty, dry conditions, or when airborne debris is present or after
extensive operation cutting tall, dry grass. 

Check the oil level

Remove grass debris from around the engine, exhaust/exhaust guard and 
air ways in the top cowl and underside of the deck housing.

Remove grass debris from the grassbag and check for signs of damage.

Check the condition of guards and safety devices and cutterblades.

Change the engine oil if continuously operating under heavy load or
high ambient temperature.

Service the air cleaner.

Lubricate wheels, pivot points and linkages and grease the inner con-
trol cables at point of entry and exit from their outer casing.

Check the clutch cable adjustment.

Sharpen the cutterblade. 

Change the engine oil.

MAINTENANCE SCHEDULE

25Hrs or Every Season

Daily 

50Hrs or Every Season

111-1102 (B)  11/11/08  9:56 am  Page 1.20

Содержание Spirit 41 617E









































Отзывы: