manualshive.com logo in svg

Spirit MU100, Руководство пользователя

Поделиться
Скачать
Spirit MU100 Скачать руководство пользователя страница 24

MU100

 

23

 

STEP 2: FRONT CONSOLE MAST ASSEMBLY 

 

1.  Locate the console mast cover (38) and route the computer cables (155 & 157) and the brake 

lever & cable (133 & 149) through the cover. Temporarily place the cover down on the main 
body of the bike. Do not snap the cover in place yet. 

2. 

Unravel the Computer Cables (155 & 157) and snake them through the Console Mast (2) until 
the cable connectors come out the top opening of the console mast. Be sure the brake cable 

(149) 

is in the groove of the cover when installing the mast during the next step. 

 

3. 

Holding the console mast in one hand and gently keeping tension on the computer cables at 
the top of the mast with the other, Install the Console Mast (2) into the Main Frame receiving 
tube under the cover (38). Keeping tension on the cables will ensure the wires don’t get caught 
between the mast and receiving tube. Do not bolt the mast in place at this time

 

4.  Install the Brake Lever (133) on the mast with the two 6mm Phillips screws (144). Install the 

cover (151) with the two 4mm screws (106-2). The top screw needs to be tightened with the 
short screw driver. 

5. 

Slide the cover (38) up the mast and bolt the mast in place with seven 5/16” x 5/8” Hex Head 
bolts (51), six 5/16” Flat Washers (72) on the six side bolts and one 5/16” Curved Washer (99) 
on the front bolt. Slide the cover down and snap in place on the main body.

 

6.  Install the two brake cable tie downs (136) with the two 5mm screws (166). 
 

 

Содержание MU100




































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды