Group Exercise Elliptical
10
•
Assemble the bracket at the bottom of the swing arms to the rod ends on the pedal arms
using the M10 x 38mm shoulder bolts (74) and the M10 nuts (110). Tighten securely.
•
Assemble the transport wheels (79) with the two 5/16” x 1-3/4” bolts (44) and 5/16” nuts (45)
•
Unpack the console and install the 3 AA batteries. Connect the speed sensor wire into the
white two pin connector accessed through the opening in the back of the console. Mount the
console onto the console mast plate and secure with four M5 x 12mm screws (59).
•
Secure the two bottle cages (98) to the console mast with four M5 x 10mm screws (59)
•
Snap the four end caps (84) onto the cup washers on the left & right pedal arm assemblies.
STEP 3: CONSOLE
