Spirit Glide Trainer, Руководство пользователя

Страница: 7 / 18

3
e
Glide Trainer
XG 200
Important Electrical Instructions
WARNING!
NEVER
remove any cover without first disconnecting AC power. If voltage varies by ten
percent (10%) or more, the performance of your e•Glide Trainer may be affected. Such
conditions are not covered under your warranty. If you suspect the voltage is low, contact your
local power company or a licensed electrician for proper testing.
NEVER
expose this e•Glide Trainer to rain or moisture. This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment. The operating
temperature specification is 40 to 120 degrees Fahrenheit, and humidity is 95% non-condensing
(no water drops forming on surfaces).
POWER CONNECTOR - Middle of unit
ƒ NEVER operate this e•Glide Trainer without reading and completely understanding the
results of any operational change you request from the computer.
ƒ Understand that changes in resistance do not occur immediately. Set your desired resistance
level on the computer console and release the adjustment key. The computer will obey the
command gradually.
ƒ NEVER use your e•Glide Trainer during an electrical storm. Surges may occur in your
household power supply that could damage e•Glide Trainer components. Unplug the e•Glide
Trainer during an electrical storm as a precaution.
ƒ Use caution while participating in other activities while pedaling on your e•Glide Trainer; such
as watching television, reading, etc. These distractions may cause you to lose balance which
may result in serious injury.
ƒ Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure.
Important Operation Instructions