background image

                                                                                                                                            EL255 Elliptical

 

 

 

WARNING! 

 

NEVER 

remove any cover without first disconnecting AC power supply. 

 

If A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be 

affected. 

Such conditions are not covered under your warranty. 

If you suspect the voltage is 

low, contact your local power company or a licensed electrician for proper testing. 

 

NEVER 

expose this 

elliptical

 to rain or moisture. This product is 

NOT 

designed for Use 

outdoors, near a pool or spa, or in any other high humidity environment. Maximum 
environmental ratings are 40-120 degrees Fahrenheit, 95% humidity non-condensing (no water 
droplets forming on surfaces). 

 
 

 
 

   

NEVER 

operate this elliptical without reading and completely understanding the results of any 

operational change you request from the computer. 

   

Understand that changes in resistance do not occur immediately. Set your desired level on the 
computer console and release the adjustment key. The computer will obey the command 
gradually. 

   

NEVER 

use your elliptical during an electrical storm. Surges may occur in your household 

power supply that could damage elliptical components. 

   

Use caution while participating in other activities while using your elliptical such as watching 
television, reading, etc. These distractions may cause you to lose balance, resulting in serious 
injury. 

   

Always hold on to a handrail or hand bar while making control changes. 

Do not use excessive pressure on console control keys. They are precision set to properly 
function with little finger pressure. Pushing harder is not going to make the unit go faster or 
slower. If you feel the buttons are not functioning properly with normal pressure, contact your 
dealer. 

Important Electrical Information 

 

Important Operation Instructions

 

Содержание Esprit EL255



























Отзывы: