Spirit Digital 328 v2
10
Before you continue, it is strongly suggested that you save your current desk settings as a User
Setup, as you are about recall the factory defaults. You will then be able to recall this User Setup
once you are finished with the guide, and return to your personal desk configuration.
To store your current settings as a User Setup, press
<MENU>
,
scroll down to ‘User Setups’ and
then press
<ENTER>
. A list of User Setups should now be displayed. Find an empty location and
then press
<STORE>
(in Snapshot panel). Now press
<ENTER>
, give the User Setup a relevant
name with the Master Encoder, then press
<ENTER>
once more to confirm. Press
<MENU>
to
return back to the main menu.
Now to recall the factory defaults: Press
<MENU>
, then scroll down to ‘User Setups’. Press
<ENTER>
to display the User Setup list, then scroll down to ’27:Factory Defaults’. Press
<RECALL>
(in Snapshot panel), and the desk should reset to its factory defaults.
Press
<MENU>
, scroll up to ‘User Options’, and press
<ENTER>
. Ensure that the ‘MIDI Channel’
setting is set to the channel you have chosen to use the 328 on, i.e. the channel that you
reserved as a ‘MIDI Thru = Off’ channel (see ‘Cakewalk Setup’ section). Press
<MENU>
to
return to the main menu.
Now to enable automation on the 328: Scroll down to ‘Automation Setup’ and press
<ENTER>
.
Set ‘MIDI Dynauto’ to ‘ON’. Press
<MENU>
, and scroll up to the ‘Snapshot Setup’ menu. Press
<ENTER>
and set ‘MIDI Recall’ to ‘ON’.
When using automation on the 328, it is strongly advised that before the start of your song you
recall a Snapshot which initializes all automation settings to their desired state at the beginning
of the song. This is easily achieved by inserting a Program Change just before the start of your
song which recalls the ‘initial state’ snapshot. Otherwise, stopping the track mid-way through an
automated sequence, then starting playback right from the beginning will cause undesired
settings.
For this reason, you must ready a ‘blank’ snapshot for recall just before the beginning of the
tutorial song.
On the 328, select the Mic/Line fader bank. Move all of the faders down to - dB. Press
<SNAPSHOT>
to enter the snapshot list. Scroll up to slot 1, then press
<STORE>
(on snapshot
panel). Press enter, then scroll down two pages and set ‘MIDI Recall’ to ‘ON’ – otherwise the
snapshot will not recall via Program Change.
Automation
5
Getting Started
Getting Started
Getting Started
Getting Started
8
