Spirit CR800, Руководство пользователя

Страница: 19 / 40

18
■
RECUMBENT & UPRIGHT Console
Power on
The commercial bikes have a built-in generator for power and do not need to be plugged into an AC
outlet. To power up the Bike simply start to pedal, the console will turn on automatically. If the
console does not light when you pedal, check that the power switch is set to
0
(Generator). The
switch is located on the front, lower left side of the main plastic cover. There is an optional 24VAC
power transformer that is available through your dealer. The AC power transformer would be used if
the bike will be operated at very low speeds. In this scenario the power to the electronic console will
be too low to maintain the display. To use the AC power transformer plug it into an AC outlet and the
power input module of the bike and set the power switch to
1 (24VAC power input).
When initially powered on the console will perform an internal self-test. During this time all the lights
will turn on for a short time. When the lights go off the dot matrix display will show a software
version (i.e. VER 1.0) and the message window will display an odometer reading. The odometer
reading displays how many hours the bike has been used and how many virtual miles the bike has
gone. The display shows: ODO 123 MI 123 HRS.
The odometer will remain displayed for only a few seconds then the console will go to the start up
display. The dot matrix display will be scrolling through the different profiles, showing the programs,
and the message window will be scrolling the start up message. You may now begin to use the
console.
Operation of Your Stationary Bike
FAN
DOT MATRIX
Resistance level, Program
Profiles and Lap Track
HEART RATE
BARGRAPH
CONTROL KEYS
FAN ON/OFF
DISPLAY KEY
Switches Display information
PROGRAM KEY
MESSAGE WINDOW
Time, Distance, Pulse,
Calories, RPM, KPH, Work
Level, Watts, METS
DISPLAY KEY
Switches Display information