CUSTOMER SERVICE 1-888-707-1880 Dyaco Canada Inc. ©2013
9
STEP 3:
Connecting Arm
1. Untie the twist tie that holds each bushing to the Connecting Arm end. Align the hole in the
end of the Connecting Arms (L & R) (
8
&
9
) with the hole in the bracket of the Swing Arms (L)
and (R), (
10
&
11
).The Connecting Arm ends should be inside of the Swing Arm (L) and (R),
(
10
&
11
) brackets. Slide a Hex Head Bolt
(101)
through each Swing Arm (L) and (R), (
10
&
11
) bracket and each Connecting Arm end.
2. Slide a Flat Washer
(142)
onto each bolt, then fasten the arms together by tightening a
Nyloc Nut
(192)
to each bolt using the Wrenches provided (
155
&
158
).
HARDWARE
#142.
5/16" × 20 × 1.5T
Flat Washer (2 pcs)
#101
. 5/16" × 1-1/4"
Hex Head Bolt (2 pcs)
#192.
5/16" × 9T
Nyloc Nut (2 pcs)
