Spirit Commercial CSC900, Руководство пользователя

Страница: 6 / 36

4
buttons on the console. If you experience difficulties
during the workout, pushing the STOP button will
bring the machine to a stop.
• Do not exceed the maximum allowable weight limit
of 400 lbs. / 180 kg.
• Use care when getting on or off the machine.
Always use the handrails. Do not step off of the
machine while it is moving. Press the STOP button
and wait for the machine to come to a complete
stop before dismounting.
• Do not overexert yourself during exercise. Stop
exercising if you feel pain or tightness in your chest,
become short of breath or feel faint. If you feel
pain or experience any abnormal symptoms, stop
exercising and consult your health care provider.
• Wear proper exercise clothing and athletic shoes
during a workout. Avoid wearing loose clothing.
Tie back long hair and keep towels away from the
moving parts. Face forward at all times and never
attempt to turn around while the machine is moving.
• Do not operate the machine if the motor shroud is
removed or if the power cord is damaged in any
manner.
• Keep all air openings free from dirt or any material
that would block the flow of air to the motor.
• The safety and integrity of this machine can only
be maintained when the equipment is regularly
examined for damage and wear and repaired. It is
manner as intended. In addition to instructing the
club members in the proper use of the equipment,
the club member should obtain a complete physical
examination form their health care provider before
beginning any exercise program.
• This machine is not intended to be used by children.
It is not intended to be used by persons with reduced
physical, sensory, or mental capabilities or lack of
experience and knowledge, unless given instruction
and under the personal supervision concerning use
of the machine by a person responsible for their
safety. Do not leave children unsupervised around
the machine.
• Assemble and operate the machine on a solid level
surface. Position the machine with a minimum of 20
inches (0.5 meters) of clearance on each side to
allow for ease of mounting and dismounting. Allow
for 48 inches (1.25 meters) of clearance behind the
machine. These dimensions are the recommended
minimum distances. The actual area for access and
passage is the responsibility of the facility and should
take into account this training envelope and any
other national or local codes or regulations.
• Keep power cord away from heated surfaces.
Unplug power cord when the machine is unattended
and before performing any preventative maintenance
such as cleaning or replacing a worn part.
• Familiarize yourself with the location of the STOP