Spirit Commercial CE800ENT Elliptical, Руководство пользователя

Страница: 13 / 52

11
www.spiritfitness.com
CE800ENT
STEP THREE
HARDWARE FOR STEP 3
PART TYPE DESCRIPTION QTY
107 Flat Washer 5/16” x 23 x 1.5T 1
132 Socket Head Cap Bolts M8 x 25mm 4
133 Wave Washer 25mm 2
134 Sheet Metal Screw 3.5 x 12mm 4
135 Hex Head Bolt 3/8” x 3/4” 2
136 Nylon Nut M10 x 8T 2
137 Bolt M10 x 1.5(14mm) 2
138 Flat Washer 3/8” x 30 x 2.0T 2
1. Unravel the
Computer Cable (No.152)
,
CSAFE Connecting
Wire (No.150), Communication Cable (No.149), HDMI
Connecting Wire (No.151)
and snake it through the bottom of
the
Console Mast (No.12)
and out the top. To install the
Mast
Tube (No.12)
, first insert 3
Socket Head Cap Bolts (No.132)
onto the mainframe then locate the
Mast Tube (No.12)
on its
position and tighten three screws. Now the last
Bolt (No.132)
must be with
Flat Washer (No.107)
to tighten to the screw hole.
2. Mount the Console Mast Covers (No. L80/R81) with 4 Screws
(No.134) .
3. Install 2
Wave Washers (No.133)
onto the console mast axle
then install the
Swing Arms (L11)(R10)
onto the axles. Do not
force them or use a hammer as damage to the bearings can
occur. Secure with a
Bolt (No.135)
and
Washer (No.138)
on
each arm.
4. Attach the bottom of the swing arms to the rod ends of the pedal arms using 2 Shoulder Bolts (No.137)
and 2 Nylon Nuts (No.136) .