Relay part number: 3-1020
(Starter Disable Kit)
©2018 Spireon, Inc. All rights reserved.
FL1 Installation
STARTER DISABLE (WHEN APPLICABLE):
•
Using a digital voltmeter, locate the wire connecting the vehicle’s ignition switch to its starter and cut
it.
•
Connect the green wire on 1x3 molex from the device to green wire on the relay (86)
•
Cut the short red wire that is connected to the long red wire (the 30 end)
•
Connect the short red wire to vehicle’s ignition wire (85)
•
Connect the white wire to one side of the vehicle’s starter wire (87a)
•
Connect the long red wire to the other side of the vehicle’s starter wire (30)
•
Make sure to cut/disconnect the diode between 86 and 85 connectors
