Spirax Sarco Steam Jet Thermocompressor, Инструкция по установке и обслуживанию

Страница: 6 / 17

IM-P493-01 EMM Issue 2 6
2.4 Inspection and Performance Confirmation
2.4.1 Receiving Inspection
Although Spirax-Sarco Limited carries out a full inspection of all units before dispatch, damage
may occur during transit. On receipt of the unit, a visual inspection will show any external
damage and hence indicate any possible internal damage that may have occurred. If damage
has occurred, please do not hesitate to contact us.
2.4.2 User’s Rating Inspection
Before installation of the SJT Steam Jet Thermocompressor, the user must ensure that the
mechanical rating of the unit is suitable for the intended service.
Details of the mechanical rating can be found on the name-plate and associated documentation.
Fig. 1 SJT Steam Jet Thermocompressor -
illustrating the preferred installation orientation
Nozzle
Low pressure
water vapour inlet
Diffuser
High pressure
steam inlet
Intermediate pressure outlet
Please note that for clarity welds are not shown.
Diffuser
2.3 Mechanical Design Temperature and Flange rating
< 374 °C
(705 °F)
ASME 150, ASME 300 and ASME 600
EN 1092 PN16, PN25 and PN40 Slip-on (Weld neck optional)
374 - 525 °C
(705 °F - 977 °F)
ASME 150, ASME 300 and ASME 600
EN 1092 PN16, PN25 and PN40 Weld neck (Slip on N/A)
375 - 570 °C
(707 °F - 1058 °F)
ASME 150, ASME 300, ASME 600, ASME 900 and ASME 1500
EN 1092 PN16, PN25, PN40, PN63 and PN100 Weld neck (Slip on N/A)