Spirax Sarco Steam Jet Thermocompressor, Инструкция по установке и обслуживанию

Страница: 13 / 17

IM-P493-01 EMM Issue 2 13
6. Commissioning
After installation and maintenance ensure that the system is fully functional. Carry out tests
on any alarms or protective devices.
7. Spare parts
The only available spare parts for the SJT Steam Jet Thermocompressor is the Nozzle and
its Gasket .
For a complete replacement unit please contact Spirax Sarco and quote the following data:
Unit Serial number: .....................................................................................................................
Original contract reference: .......................................................................................................
Your item number (if applicable): ................................................................................................
3. Whilst the Nozzle is removed from the unit, it is possible to inspect the Diffuser. The bore
should be parallel and should not appear warped.
4. Re-assembly of the SJT is achieved by using the reverse procedure. However, care must
be taken to ensure that:
-
The replacement Nozzle Gasket is the same thickness as the original one.
-
There is concentricity between the Nozzle and the Diffuser. This will ensure that the
Thermocompressor performance is maintained. Concentricity will be automatically
achieved if the Nozzle and Diffuser are still in prime condition.