Copyright ©2013 Mad Dogg Athletics, Inc. All rights reserved. SPIN®, Spinner®, Spinning® and the Spinning logo are registered trademarks of Mad Dogg Athletics, Inc.
10
LUBRICATING THE CHAIN
STEP 1:
Locate the flywheel adjustment cover on
the front right side of your Spinner® Ascent.
STEP 2:
Using your fingers or a flat head
screwdriver, gently pop out the flywheel
adjustment cover from the chain guard. This will
expose a small section of the chain.
STEP 3:
Use a chain lube such as SPINTECH®
Silicone Fitness Lube or other oil-based lubricant with
a spray nozzle. Do not use a wax-based lubricant.
STEP 4:
When spraying the lubricant onto the
chain, cover the floor under the bike and take
care not to allow the lubricant to drip onto
the floor.
STEP 5:
Lock the brake by turning the resistance
knob clockwise. With the brake locked up, spray
the lube onto the chain. Loosen the brake and
rotate the chain carefully and slowly, by hand,
approximately a quarter turn. Then stop it, tighten
the brake again and spray lube onto the next
portion of the chain. Repeat the above steps a
total of six times to lubricate the entire chain.
STEP 6:
Carefully replace the flywheel
adjustment cover. Your Spinner® Ascent is now
ready for testing.
During heavy use of your Spinner® Ascent, it may become necessary
to lubricate your chain to reduce chain associated noises. If you
have any questions regarding lubricating your chain, please contact
customer service at
800-847-SPIN (7746)
for assistance.
SPINTECH® lubricants, polish and grease are
available at www.spinning.com.
2
1
Содержание Spinner Ascent
Страница 1: ...OWNER S MANUAL...
