8
Testing your Deckvest LITE
You should always test the inflation of your lifejacket to ensure you are fully aware of how
it functions.
This can be done with the Oral, Manual or Automatic inflators.
If planning to test the lifejacket with the Oral inflator you will not need any spare parts
or rearming kits as long as you remove the CO
2
cylinder and automatic capsule before
entering the water.
If you are a weak swimmer it is strongly recommended to use an automatic lifejacket or an
inherently buoyant device.
1.
Put on the Deckvest LITE and adjust to fit.
2.
Stand in shallow water or swimming pool, just deep enough for your head to be
above the surface.
3. Inflation:
Automatic:
lifejacket should fully inflate within five seconds of water
contacting the firing head.
Manual:
lifejacket can be activated by a sharp pull on the inflation handle.
Oral inflation:
Ensure that cylinder and firing head have been removed before
entering the water. Open the lifejacket cover from the zip breakout point, locate
the oral inflator, remove cap and blow through tube.
4.
After testing completely deflate the lifejacket using the oral inflator.
5.
Let the Deckvest dry thoroughly. Do not expose to direct heat.
7
WARNING:
If in doubt, send your Deckvest LITE to your nearest service centre for
evaluation and/or servicing.
If you are not completely confident about undertaking the self-inspection and
servicing of your lifejacket in accordance with these instructions, you must
not use your lifejacket again until it has been professionally inspected and
serviced. (For details of your nearest service centre see www.spinlock.co.uk).
Any modification or repair to any part of the Deckvest LITE is expressly
forbidden unless carried out by Spinlock Ltd.
FITTING ADJUSTMENTS (PAGE 1)
A. Put on over your head, B. Fasten side clip, C.
Pull chest belt tight – it is unsafe to wear any
lifejacket loosely. D. Adjust back strap so that
chest belt is positioned above lowest point of
rib cage. E. Attach crotch strap - passing through
legs before fastening plastic buckle in pocket
on front.
GENERAL INFORMATION
Important notice: Specific training is
essential before use.
Read this notice carefully before use. This
technical notice illustrates ways of using this
product. Many types of misuse exist which
are impossible to list or even imagine. In case
of doubt or any problem of understanding,
contact Spinlock. Water sports are dangerous
activities which may lead to severe injuries or
even death. Adequate training in appropriate
safety techniques and methods is essential and
acquiring this training is your own responsibility.
You personally assume all risks and
responsibilities for all damage, injury or death
which may occur during or following wrong
use of our products in any manner whatsoever.
If you are not able, or are not in a position to
assume this responsibility or to take such risks
do not use this equipment.
USE
This product must only be used by competent
and responsible persons, or those placed under
the direct and visual control of a competent and
responsible person. Check that this product
is compatible with other components of your
equipment. To prolong the life of this product,
care in use is necessary. Avoid rubbing against
abrasive surfaces or sharp edges. 150N: This
level is intended for general application or for
use with foul weather clothing. It will turn an
unconscious person into a safe position and
requires no subsequent action by the user to
maintain this position. Full performance may
not be achieved if using watertight/waterproof
clothing or in other circumstances. Gas cylinders
are dangerous goods and should be kept away
from children and not misused. Do not use as a
cushion. Train yourself in the use of this device.
Compatible with safety harness and clothing.
WARNING: WHEN NOT CORRECTLY FITTED,
THIS DECKVEST LITE MAY NOT PERFORM
AS A LIFEJACKET AND MAY ENDANGER
THE USER.
CLEANING, MAINTENANCE, STORAGE
Remove gas cylinder and automatic components
and then clean by hand and rinse in clean fresh
water (maximum temperature 30° C). Dry in a
cool, ventilated dark room. Grease spots may be
removed with trichlorethylene. Webbing shrinks
very slightly in drying. Always carry and store
your Deckvest in a well ventilated bag. Though
UV protected, this product is best stored away
from direct light, in a well ventilated place away
from extreme temperatures.
CHEMICALS
All chemicals (including petrol, battery acid,
corrosive materials and solvents) should be
regarded as harmful. If your Deckvest comes in
contact with chemicals, please notify Spinlock,
stating the precise chemicals concerned. We will
investigate and give our advice.
(EN) English
Safety Notices
REMEMBER: RE-ARM AND RE-PACK THE LIFEJACKET IN ACCORDANCE WITH
THESE INSTRUCTIONS - See video at www.spinlock.co.uk
WE RECOMMEND THAT THE AUTOMATIC CAPSULE (PART NO. DW-RAK) IS
REPLACED ANNUALLY. ALSO UNSCREW AND INSPECT THE THREADED END OF
THE CO2 CYLINDER TO CONFIRM IT IS UNUSED.
deckvestlite_3R679A_10.indd 8-9
02/10/2014 14:57
